Highlanders 26M with all her mods....
https://www.youtube.com/watch?v=YGIdAraNFew
https://www.youtube.com/watch?v=oSGOgWrpezs
https://www.youtube.com/watch?v=n4fjmyDF4_4
Enjoy
G
Search found 2392 matches
- Fri Nov 06, 2020 12:38 am
- Forum: Repairs and Modifications
- Topic: Nominations Open for "Worst Skinflint" of this Site
- Replies: 20
- Views: 3380
- Fri Jun 19, 2020 4:56 am
- Forum: MacGregor Powersailor Discussion
- Topic: What is causing this alarm on my Honda O/B?'
- Replies: 53
- Views: 9892
- Fri Jun 19, 2020 4:53 am
- Forum: Repairs and Modifications
- Topic: Tieing off the Clew of the Main Sail.
- Replies: 11
- Views: 3400
Re: Tieing off the Clew of the Main Sail.
I get it now! Also.. the main sail has a Shackel at the Tack , should I use that, or just attach the tack grommet directly to the mast? AD If memory serves, I think I used that to get the boom up another inch. Was hitting the dodger with Highlanders ridged vang install. If he's mounted that track a...
- Fri Jun 12, 2020 4:13 am
- Forum: MacGregor Powersailor Discussion
- Topic: Bow in Mast.
- Replies: 20
- Views: 4811
- Thu Jun 11, 2020 2:34 pm
- Forum: MacGregor Powersailor Discussion
- Topic: 26M Vang Question
- Replies: 24
- Views: 6334
Re: 26M Vang Question
Yep
So if you're looking to steal that M75 off the back.... you gotta follow AD around and wait for your window
G
- Thu Jun 11, 2020 2:25 pm
- Forum: Trailers & Towing
- Topic: Lifting a Mac 26M
- Replies: 22
- Views: 6497
Re: Lifting a Mac 26M
2 cans
Every spring
No sanding, just wash and apply
To get her off the trailer, what highlander said...
G
Every spring
No sanding, just wash and apply
To get her off the trailer, what highlander said...
G
- Thu Jun 11, 2020 2:06 pm
- Forum: Repairs and Modifications
- Topic: 26M Quick Disconnect Motor connector
- Replies: 8
- Views: 2727
Re: 26M Quick Disconnect Motor connector
Nice work!
G
G
- Thu Jun 11, 2020 1:57 pm
- Forum: MacGregor Powersailor Discussion
- Topic: Finally In The Water
- Replies: 9
- Views: 3017
Re: Finally In The Water
Glad you're on the water Re fuel lines, the line from the tank to the extension including the hand primer is brand new, Aug 2019 Idle might need adjusting, have ran carb cleaner through each year and after a good long run, still a bit low for my taste. Line running from extension back to motor is ol...
- Thu Jun 11, 2020 1:50 pm
- Forum: MacGregor Powersailor Discussion
- Topic: Bow in Mast.
- Replies: 20
- Views: 4811
Re: Bow in Mast.
Bow in the mast is from being stored 1 season with no pin in the foot plate to keep the mast from rotating. That allowed the mast to turn and subsequently bow without a support in the middle. Added pin, kept mast from rotating while stored, no more sag in the middle. Also, when you put the mast up, ...
- Thu Jun 11, 2020 1:46 pm
- Forum: MacGregor Powersailor Discussion
- Topic: What goes here? What is this for?
- Replies: 58
- Views: 11429
Re: What goes here? What is this for?
Pin is mainly used for when the mast is down, or being raised. Once up, remove pin To rotate the mast under sail, just pull back on the main sheet That will rotate the mast when the mainsail has load. Tack, load up the main, again pull back on the main sheet and it will rotate to the other side No b...
- Thu Jun 11, 2020 1:43 pm
- Forum: Repairs and Modifications
- Topic: Tieing off the Clew of the Main Sail.
- Replies: 11
- Views: 3400
Re: Tieing off the Clew of the Main Sail.
It is that length, because it had to be for the deep reef. At full main and no reef, there is a lot of rope left over. At 1st reef, there will be less At 2nd reef, there will be just enough to do the trick, reaching all the way from the aft of the boom, through the new clew position and back to the ...
- Sun Dec 22, 2019 10:54 am
- Forum: MacGregor Powersailor Discussion
- Topic: 26m Aft Cabin Cushion Question
- Replies: 30
- Views: 6714
Re: 26m Aft Cabin Cushion Question
That looks like a nice option. Although I do like the "cut out" for the cooler idea. Andrew Dont use that area for your cooler Trust me Keep a heavy cooler on the floor Right beside the dinette in even with the keel I put the cooler in that aft berth cutout once, ...... ONCE! Never again....
- Sun Dec 22, 2019 10:50 am
- Forum: MacGregor Powersailor Discussion
- Topic: We’re Gettin’ the Band Back Together!!
- Replies: 14
- Views: 3405
- Sun Dec 22, 2019 10:49 am
- Forum: MacGregor Powersailor Discussion
- Topic: 26M Vang Question
- Replies: 24
- Views: 6334
Re: 26M Vang Question
Highlander is the guy who made it for Pegassus
https://www.youtube.com/watch?v=s0Bti3FUoDg
https://www.youtube.com/watch?v=0TFUL0F7fyg
Those will help, or scare you....
G
https://www.youtube.com/watch?v=s0Bti3FUoDg
https://www.youtube.com/watch?v=0TFUL0F7fyg
Those will help, or scare you....
G
- Sun Dec 15, 2019 9:30 am
- Forum: MacGregor Powersailor Discussion
- Topic: 26M Vang Question
- Replies: 24
- Views: 6334
Re: 26M Vang Question
Hi AD Your mast will rotate. Keep the brass pin out, after removing from the bow from trailering. I used that pin to keep it locked out as I found no benefit to rotation and was problematic at best. However, if you want to, keep pin out and after tacking, pull back on main sheets between boom and tr...