Has anyone replaced mast with Dryer DM-6 mast extrusion for 26x? This was in stock 3hr drive away but I instead ordered one from BWY months ago that was said would be shipped in one to two weeks and would be drilled for 26X hardware. Last update on ship date from BWY has long passed and no responses...

Does motor point straight when rudders are strait? If not I believe you just need to detach the steering linkage end from motor and rotate it to screw it in to shorten it as needed. Think there is locking nut at end of the threaded section you need to loosen first.

From memory. There is a nut inside cabin that holds the hanger in. Hanger bolt will probable be sealed in with 5200 adhesive and may need to hammer bolt end (screw nut to end and hit that to beak free). I think manual shows the hanger details well. Yes you can replace centerboard on the trailer.

My 26x came with a Genoa and just got a new jib from Peak Sails. Unfortunately I put it on furler to find Sunbrella on opposite side as that of Genoa. Now need to wind fuller in opposite direction if I want the Sunbrellla on outside and looks like I need to rotate the cover to not rub. And Genoa wil...

Trailer Parts Superstore says this is normal for bias ply tires. Had them installed on the rims and they do look normal now.

I just got new trailer tires by UPS from Trailer Parts Superstore but they do not look good! One is half inside out. The other looks deformed with the tread diameter at one side looking different from the other side.

I had same problem getting coax cable through that channel. Cable was white so I routed it on outside of the channel. Think I used a couple of small cable clamps to keep it close to the channel.

Motor strait into wind, flake and bungee sail, run back to steer as needed.

Boblee, Based on my recent reseach to install a second battery using a 1-all-2 switch : The "common" terminal on the "1-all-2 switch" goes to the motor positive lead so that the motor starter and motor charging output can be switched to the battery on terminal 1 or the battery on...

The "common" terminal on the "1-all-2 switch" goes to the motor positive lead so that the motor starter and motor charging output can be switched to the battery on terminal 1 or the battery on terminal 2 or both.

I gave up the search for a replacement lug bolt and purchased a pair of new drums from Tactor Supply Company. $122 for the pair. Includes bearings.

Has nobody personally ordered replacement lug bolts and knows what part number to get from where! I have already gotten two different wrong lug bolts from Advanced Auto (splined part was not a correct match) after having them match the old lug, been told by a Napa guy he needed a part number, and or...

What is the NAPA part number?

I need to replace a Lug bolt on a 2002 26X trailer. Anybody know of a source for a replacement bolt?

My Mercury 50Hp Bigfoot properller has taken some abuse from floating wood. What replacement propellor do I want? My current prop has two blades with some of the edges missing. Can the prop be repaired? Can this imbalance damage the engine?