Search found 1895 matches

by Ixneigh
Mon Jan 21, 2019 1:34 pm
Forum: MacGregor Powersailor Discussion
Topic: Prop ding
Replies: 4
Views: 1356

Prop ding

Took the boat out under power to run her at speed for a few minutes and hit the prop on something. Took a nice ding out of it. I’ll use it as a spare and look for a new one. Since I hardly ever use the boat under full power, can someone recommend a low and midrange option for the etec 60? My current...
by Ixneigh
Tue Jan 15, 2019 6:42 pm
Forum: Repairs and Modifications
Topic: tired of polishing the Coon stripes
Replies: 35
Views: 6381

Re: tired of polishing the Coon stripes

I awlgripped mine. Even the bad paintjob looks much better than faded gelcoat.

Ix
by Ixneigh
Sat Jan 12, 2019 8:47 am
Forum: MacGregor Powersailor Discussion
Topic: Ruddercraft foil vs
Replies: 7
Views: 1971

Re: Ruddercraft foil vs

I'd say 9 knots is tops. And that is running in a lot of wind. Average speeds are in the 4 to 6 know range. Those lower speeds dont really need or benefit from thin foils. Yesterday I spent the afternoon on a reach, under main. Average 3.5 knots with the board half down. I noticed much less improvem...
by Ixneigh
Fri Jan 11, 2019 7:59 am
Forum: MacGregor Powersailor Discussion
Topic: Ruddercraft foil vs
Replies: 7
Views: 1971

Re: Ruddercraft foil vs

I'll try to post photos. I'll be more comfortable carrying sail downwind since the running backs are installed. Is the foil the exact same on your rudders as the plastic ruddercraft rudders? My boats ghosting steering was night and day. And I sail like that often since it allows me to poke into unkn...
by Ixneigh
Tue Jan 08, 2019 7:48 pm
Forum: MacGregor Powersailor Discussion
Topic: Boat's Planned Mods
Replies: 15
Views: 2986

Re: Boat's Planned Mods

I might have another shot in a few years. Both my batteries are pretty new AGM and the system is working well. So, I'm in no real rush to change anything. By the time I need new batteries, the charge controller will be old enough to replace, also.

Ix
by Ixneigh
Mon Jan 07, 2019 6:51 pm
Forum: MacGregor Powersailor Discussion
Topic: Boat's Planned Mods
Replies: 15
Views: 2986

Re: Boat's Planned Mods

I had a compact lithium ion battery hooked to a 20 watt panel with a 10 amp solar controller. After a week of not using the system, battery discharged and would no longer accept a charge. I had set up this system just to try out Lithium batteries. It worked ok while I was using the battery every day...
by Ixneigh
Mon Jan 07, 2019 11:17 am
Forum: MacGregor Powersailor Discussion
Topic: I hate to say it...
Replies: 28
Views: 6587

Re: I hate to say it...

I'm assaulted by ads everywhere else I go. Might as well be here, one of the few site I actually care about :D

Ix
by Ixneigh
Sun Jan 06, 2019 6:36 pm
Forum: MacGregor Powersailor Discussion
Topic: Boat's Planned Mods
Replies: 15
Views: 2986

Re: Boat's Planned Mods

Re mystery of solar refrigerator There is none. Small Dometic brand compressor driven cold box runs off my 150 watt array. Re lithium batteries I toasted mine even with a charge controller. Beware. I think I might wait a few years yet. Re vinyl fabric are you going to recover the whole inside of the...
by Ixneigh
Sun Jan 06, 2019 6:21 pm
Forum: MacGregor Powersailor Discussion
Topic: I hate to say it...
Replies: 28
Views: 6587

Re: I hate to say it...

What about a simplified site that's easier to take care of? Or running some ads on this one to raise money.
From west marine or other boat related business.

Ix
by Ixneigh
Sun Jan 06, 2019 6:15 pm
Forum: MacGregor Powersailor Discussion
Topic: Ruddercraft foil vs
Replies: 7
Views: 1971

Re: Ruddercraft foil vs

Took the boat out today with just a main in very light airs. 3-5 knots maybe. Had no problem steering with the barest way on, perhaps a knot or two. Boat handled better than she ever had before in these conditions, which I have shied away from because of unreliable helm. By the end of the day I was ...
by Ixneigh
Thu Jan 03, 2019 8:06 am
Forum: MacGregor Powersailor Discussion
Topic: Ruddercraft foil vs
Replies: 7
Views: 1971

Ruddercraft foil vs

When I got my wood rudder blanks from that guy in TX, I just a tad dismayed that the foil section didn't match the plastic rudder blade I had sent to him to copy. The thickness was carried farther aft on the wood blanks. I chocked it up to the idea that you are only getting so much work out of someo...
by Ixneigh
Thu Jan 03, 2019 7:54 am
Forum: MacGregor Powersailor Discussion
Topic: Trailer sailor
Replies: 11
Views: 2383

Re: Trailer sailor

I'd have already ripped those non
Kickup rudders off.
Shes probably better built. But not much faster under sail, and certainly not under power. And not nearly the room. At 4 times the price I'll pass.

Ix
by Ixneigh
Thu Jan 03, 2019 7:37 am
Forum: Repairs and Modifications
Topic: Dinghy Talk
Replies: 3
Views: 1473

Re: Dinghy Talk

Towing anything behind a mac sucks. I use a paddle board that hangs from the side of the boat. Its generally practical for a single person. I also have a skin on frame foldable pram with a mini outboard motor that stores below. No easy solutions on small cruising yachts.

Ix
by Ixneigh
Mon Dec 31, 2018 8:38 am
Forum: MacGregor Powersailor Discussion
Topic: Keel for motoring
Replies: 9
Views: 1981

Re: Keel for motoring

The skeg mod on my M model makes a big difference.
On sailing as well.
Before cutting off the addition, you should sail the boat with it once or twice. Also, dual fins help more than single imo

Ix
by Ixneigh
Tue Dec 18, 2018 9:11 am
Forum: Repairs and Modifications
Topic: LED tape lights
Replies: 8
Views: 2117

Re: LED tape lights

Be aware that the blue led light is evidently bad for ones eyes.
Ix