Hi everyone,
I am looking for the keel drawing (or detail dimensioning) of the MAC25 1986. The one I have is homemade and I schedule to make the retoration this winter (2011).
Let me know if you have any drawing including picture.
Marc Bertin,
MAC Gregor 25 (MAC25) Keel Drawing
-
THE CUSCUS
- First Officer
- Posts: 344
- Joined: Fri Sep 11, 2009 7:59 am
- Sailboat: Venture 25
- Location: North East River, MD
Re: MAC Gregor 25 (MAC25) Keel Drawing
I don't have any of the dimensions handy, but here is my write-up on my keel rebuild which has some good pictures of its shape. (in the mods section of this website, there is a part 1 and part 2)
http://www.macgregorsailors.com/modt/in ... ?view=1483
http://www.macgregorsailors.com/modt/in ... ?view=1483
-
MBertin
- Deckhand
- Posts: 27
- Joined: Fri Aug 08, 2008 10:14 pm
- Sailboat: MacGregor 25
- Location: Canada, Laval
Re: MAC Gregor 25 (MAC25) Keel Drawing
Thank you for the information.
I will try to combine the piece by piece information and create a 3D model. I will post the drawing as soon it will be completed. The 3D model is important to ensure the new keel shape will fit the boat but also the space available between the boat and the trailer.
Keep me post if one of you find the oroginal blue print from MCGregor directly.
Marc,
I will try to combine the piece by piece information and create a 3D model. I will post the drawing as soon it will be completed. The 3D model is important to ensure the new keel shape will fit the boat but also the space available between the boat and the trailer.
Keep me post if one of you find the oroginal blue print from MCGregor directly.
Marc,