Here is one option thats working fine - http://www.macgregorsailors.com/modt/in ... ?view=1456
Mark
toe in on rudders???
-
Wayne nicol
- Captain
- Posts: 645
- Joined: Thu Feb 14, 2013 9:21 am
- Sailboat: MacGregor 26M
- Location: Queen CHarlotte Islands,B.C.---------------- lightning white 2012 26M "Merrylegs"
Re: toe in on rudders???
thanks mark, that looks like a good fix
Does everyone else get a full 90deg of travel from the motor.
I had to shorten my bwy quick connect system by about 2" to get it properly balanced/ even.
Now I need to get some more travel out of the steering arm.
So got that figured, just need to remove the wood mock ups and fab the s/s one for install.
Then I gotta mod a turnbuckle for the s/ b steering, so one rudder is adjustable., to eliminate the tow in problem.( as in mod above)
Oh and also removed a considerable amount of slop from the rudder assemblies already.
Seems like when you buy a Mac, they should come standard with a lathe and a mill!!
Wayne
Does everyone else get a full 90deg of travel from the motor.
I had to shorten my bwy quick connect system by about 2" to get it properly balanced/ even.
Now I need to get some more travel out of the steering arm.
So got that figured, just need to remove the wood mock ups and fab the s/s one for install.
Then I gotta mod a turnbuckle for the s/ b steering, so one rudder is adjustable., to eliminate the tow in problem.( as in mod above)
Oh and also removed a considerable amount of slop from the rudder assemblies already.
Seems like when you buy a Mac, they should come standard with a lathe and a mill!!
Wayne