Tony,

I hope that your project has gone well. We will appreciate a video to share your enjoyment and to learn from your experience.

Finally, I have come to the conclusion that the best place for installing two charis is just after the mast base, before the hatch opening. This is white engraved place and seems to be strong enough to hold the weight of two persons.

Please feel free to give advice.

Nice work Tony.
Have you given any trim angle, while fixing the engine. I mean transom wedge sort of thing.

Now, waiting for the vedeo.

It was in the forward of the base of the mast.

since the boat was parked on the birth, therefore could not realise, about the question of jib.
Suppose, if they are using Genoa, then both chairs would be lying on a free space and geneo would pass through very easily, while changing direction.

I had visited one of the marina's in Valencia (Spain) and saw couple of macs. IOne of them had, fixed two individual chairs, very near to the base of the mast. This was made in such a way that it was not effecting any position of the boom. I was unable to take the picture at that time but when I ret...

Tony,
Hoping, this time every thing has gone well, so we are waiting to hear from you about the performance of 115 hp.

Beene,

Your picture does not translate any thing and neither it goes to any link.

Could you pleae re check.

Regards
Shehzad

Shehzad, I started with the rails at the bow. I ran two sets of rails on each side. The total length was 18 feet for both sets of rails. That left about 8 feet from the transom that was not covered by the rails. To get an idea measure from the bow back 18 feet and you will have the placement. The b...

Hi to all of you, First of all, I must say that all of you are very cooperative and every body is trying help as much as possible. Tony, I would like to buy several other things including wedges but it is not that simple for me in getting the things all the way from U.S.A to Pakistan. Secondly the t...

beene wrote:Shehzad

Please do not post your email address right on here. Instead use the user options to add email info into your Profile, or use the PM function.

Cheers

Thanks for your advice. What is PM functions ??

One other thing, With the Evinrude 115, I am able to tilt the motor all the way up without it hitting the underside of the captain's chair. Yeah. I have about an inch and one half for clearance. Now I need to go and cut a new hole for the ball unit on the steering arm. Tony Tony, When you are going...

Leon and the Others, Well I was "Finally" able to get the throttle linkage squared away. I took the boat for a little spin. With my Pops' gps we got to an indicated speed of 31.6 mph. That was with three adults on board and some stuff down below. I know I should have changed it to knots b...

Highlander wrote:Here's a link to some BEENE POWER !

http://s235.photobucket.com/albums/ee20 ... 010017.flv

J

Highlander,

What is the power of the engine ?

Regards
Shehzad

Tony,

I hope that by now, you would have finished up with your 115 hp engine.

Please let me know, what difference you are feeling.

Regards
Shehzad

Please do let me know the results and your satisfaction, after installing 115 HP. I also intend to do the same with my 26M. At present I am having FT50 Yamaha and I wanted to replace with 115 hp Yamaha. Are you also using wedges ? Could you please send me pictures of your engine's installation. Rega...