:( A few years ago we delayed our annual retreat from the lake into the month of October and the result was dealing with our boat and the entire marina encased in about an inch of ice. A friend and owner of a Bayfield fired up the diesel and acted as an icebreaker to create an ice free channel about...

I've got a 96 and it does have a second ballast fill valve in the hull and is opened and closed from the step. I found early on that it leaked as someone has already indicated, it was caused by the stainless plate, that seals to the hull, being bent, I straightened it, closed it and never used it ag...

Don good question, the jack on my Suburban is a screw-type scissor jack and in the full down position is a little over 4 inches tall. When I checked it out on my trailer I found I've got about 4.5 inches of clearance between the bottom of the axle and the the rim, so I think I'm good but it might ge...

Hi Andy, I own a 96 Suburban and 26X. Although I haven't had to actually use to change a blowout I know that I did check out the Burb's jack to see if it fit under the trailer axle and it did.