Towing jet ski behind 26m in water

A forum for discussing issues relating to trailers and towing MacGregor sailboats.

Moderators: Catigale, Paul S, Heath_Mod, beene, Hamin' X, kmclemore, tangentair

Post Reply
Rds1969
Posts: 9
Joined: Wed Aug 29, 2012 4:48 pm
Sailboat: MacGregor 26M
Location: Toronto

Towing jet ski behind 26m in water

Post by Rds1969 » Sun Apr 03, 2016 10:42 am

Has anyone towed a jetski behind there boat while underway.

Trying to figure out how to keep the jetski from banging against the motor when stopping or slowing down.

Thx

User avatar
Azzarac
First Officer
Posts: 215
Joined: Mon Apr 09, 2012 10:31 am
Sailboat: MacGregor 26X
Location: "Chameleon" in the Middle of the Mid-West w/Honda BF50
Contact:

Re: Towing jet ski behind 26m in water

Post by Azzarac » Sun Apr 03, 2016 11:15 am

We have towed ours with a bridle and about 40' of tow line (more or less depending on water conditions). The ski tends to slow down faster than our :macx: so we have never had an issue with it bumping into the transom. Make sure to check the owners manual of the ski on how to tow your model. The Kawasaki Jetski brand (at least our year of ski) doesn't seem to need any special towing prep work, however, Sea-doos will flood if not prepped properly for tow. I imagine other brands have their specific idiosyncrasies also.

User avatar
Catigale
Site Admin
Posts: 10363
Joined: Fri Jun 11, 2004 7:59 pm
Sailboat: MacGregor 26X
Location: Admiral .............Catigale 2002X.......Lots of Harpoon Hobie 16 Skiffs....Island 17
Contact:

Re: Towing jet ski behind 26m in water

Post by Catigale » Wed Apr 06, 2016 7:56 am

Ive used my boarding ladder as a solid tow bar for my 100#plastic dink on the Atlantic, for a 10 mile tow under power/sail, but a Jetski is a much bigger load.

Sumner has some nice pics of his tow setup if you search his posts with the helpful little yellow arrows.

mike0404
Just Enlisted
Posts: 19
Joined: Mon Jun 29, 2015 1:57 pm
Sailboat: I'm Shopping

Re: Towing jet ski behind 26m in water

Post by mike0404 » Wed Apr 27, 2016 11:55 am

I would look at some form of bracket with flottation capacities. Check with Armstrong brakets or another make for such a bracket for heavy outboards motors. I would even consider some kind of use for the seadoo . in shallow waters ...beware of algeas.

Post Reply