another A/C mod for an X (semi-permanent)

A forum for discussing boat or trailer repairs or modifications that you have made or are considering.
User avatar
mastreb
Admiral
Posts: 3927
Joined: Wed Feb 09, 2011 9:00 am
Sailboat: MacGregor 26M
Location: Cardiff by the Sea, CA ETEC-60 "Luna Sea"
Contact:

Re:

Post by mastreb »

Catigale wrote:1 HP is about 750 watts, so if you are pulling 25 amps at 12 VDC that would be 300 watts, about 1/2 a HP at 100% efficiency.

I think alternators run at about 90% efficiency IIRC??
Typical car alternators are about 65% efficiency, generally due to being engineered to work well across a widely variable RPM range. Gensets are more typically 80% efficient. Only the very highest quality alternators and motors reach 90% and they're very expensive ($1500 compared to $100).

But you are correct in that 40% seems really low.
sharonlmiracle
Posts: 3
Joined: Mon Mar 08, 2021 4:57 pm
Sailboat: MacGregor 26M
Location: Greenville, South Carolina

Re: another A/C mod for an X (semi-permanent)

Post by sharonlmiracle »

Have you ever seen anyone do this same setup with a 26M. It's really brilliant, and we'd love to not have to reinvent the wheel.
Grayrider61
Posts: 3
Joined: Thu Feb 11, 2021 8:16 pm
Sailboat: MacGregor 26X
Location: Georgia

Re: another A/C mod for an X (semi-permanent)

Post by Grayrider61 »

Can I please get any dimensions for these cuts or any photos not listed here thanks
[email protected]
User avatar
Jimmyt
Admiral
Posts: 3402
Joined: Sat Jul 18, 2015 9:52 am
Sailboat: MacGregor 26M
Location: Mobile AL 2013 26M, 60 Etec

Re: another A/C mod for an X (semi-permanent)

Post by Jimmyt »

Billy was last active in July of this year, so he's still lurking. If you click on his name, you can go to his profile page and send him a private message or email.

I think he was selling these "Billy Boxes", so he may be able to hook you up with one.
Jimmyt
P-Cub-Boo
2013 26M, Etec 60, roller Genoa, roller main
Cruising Waters: Mobile Bay, Western Shore, Fowl River
leefrankpierce
First Officer
Posts: 255
Joined: Fri Oct 06, 2017 5:13 am
Sailboat: MacGregor 26X
Location: Dallas Ft-Worth Texas

Re: another A/C mod for an X (semi-permanent)

Post by leefrankpierce »

Grayrider61 wrote: Sun Aug 20, 2023 11:46 am Can I please get any dimensions for these cuts or any photos not listed here thanks
[email protected]
I want em too.
Somebody go get Billy.
26X in Dallas Fort-Worth area Texas
Slip at Eagle Mountain Lake
:macx:
Post Reply