MacGregorSailors.com

Chinook wrote:.... It's slightly larger than the original, all around, and doesn't fit in the fiberglass tub. I had to trim the rim of the opening under the seat cushion a bit, to accomodate the cooler's handles.

...removing the stock container and building a new platform directly on top of the water ballast construction will give You about twice as much space for cooler and other things...



Marked with the yellow arrow is a leftover from my gallay mod. I don´t need this space for a cooler.
http://www.macgregorsailors.com/modt/in ... ?view=1046


Rainer

doesnt your back hurt when working in the dinette seat area doing modifications ?

In my experience, a sore back and scraped knuckles accompany virtually every mod project undertaken, regardless of location.

telwin wrote:doesnt your back hurt when working in the dinette seat area doing modifications ?

..it´s not that painfull, what´s realy hurting me every time is laying cables

i also hit my bald head today (ouch ) on an uncovered bolt holding the head window when installing a sealand toilet in my x