Anyone ever Purchase An Anchor Sail

A forum for discussing boat or trailer repairs or modifications that you have made or are considering.
User avatar
Jeff Stagg
Deckhand
Posts: 38
Joined: Sat Jan 24, 2004 10:32 am
Location: Roseville, CA USA

Bridle Method with Montana Cinch

Post by Jeff Stagg »

Anchoring on the lake overnight means bow and stern anchors for me, with the Bullwagga stern anchor taking the brunt of the 180 degree wind shift after sunset and the Fortress taking the brunt after sunrise when it shifts back; of course, they would both be off the bow on the salt by just walking the rode forward to the bow cleats after setting the stern anchor.

When anchoring for a few hours, it's just the bow anchor, and the bridle method Frank describes works wonders to keep the boat steady and keeping the kids from getting seasick from the swinging as well as keeping the boat within a few feet while swimming. About three years ago at the Pacific SailExpo I picked up a few "Montana Cinches" and they work great to connect lines without knots, visit [www.montanacinch.com].

I have photos of the bridle closeup with the cinch and of the boat showing the bridle and the angle to the waves, but I don't know how to post them here, so if anyone is interested in them, send an e-mail or tell me how to post a photo via e-mail as I don't keep up here.
User avatar
baldbaby2000
Admiral
Posts: 1382
Joined: Sun Mar 28, 2004 8:41 am
Location: Rapid City, SD, 2005 26M, 40hp Tohatsu
Contact:

Post by baldbaby2000 »

The best way of attaching one is to your back-stay, and as Captain Hook said to Smee, "that's where the canker gnaws!" No back-stay on an M.

I am going to attache it to my main halyard, to the boom, and to the mast.
I am just fishing for other ideas.
Seems like you can run the main halyard aft to where a backstay would be attached and use that; maybe that's what you mean here.
Post Reply