Hi all,
I purchased a Mac26X in December but will get it delivered on Saturday (still lockdown here in Austria).
So exited, my first monohull (after 30 years of Wharram Cat, Kelsall Tri and Farrier Tri)!
Will sail mostly on Lake Neusiedl in Austria, occasionally Med or Baltic.
I could get a nice used gennaker here, but not sure about the size.
What are the sizes (leech/luff/foot) you have (w/o bow pole)?
Any recommendations?
best,
Reinhard
Mac26X gennaker size
-
Jimmyt
- Admiral
- Posts: 3402
- Joined: Sat Jul 18, 2015 9:52 am
- Sailboat: MacGregor 26M
- Location: Mobile AL 2013 26M, 60 Etec
Re: Mac26X gennaker size
Congrats on the boat purchase. Check this. http://www.thesailstore.com/macgregor-a ... e2ee1e1f47
I have the factory standard, which they say are the same for X and M, but I've never measured it. Maybe that site will get you close
I have the factory standard, which they say are the same for X and M, but I've never measured it. Maybe that site will get you close
Jimmyt
P-Cub-Boo
2013 26M, Etec 60, roller Genoa, roller main
Cruising Waters: Mobile Bay, Western Shore, Fowl River
P-Cub-Boo
2013 26M, Etec 60, roller Genoa, roller main
Cruising Waters: Mobile Bay, Western Shore, Fowl River
-
NiceAft
- Admiral
- Posts: 6754
- Joined: Tue Feb 01, 2005 7:28 pm
- Sailboat: MacGregor 26M
- Location: Upper Dublin,PA, USA: 2005M 50hp.Honda4strk.,1979 Phantom Sport Sailboat, 9'Achilles 6HP Merc 4strk
Re: Mac26X gennaker size
Reinhard,
Welcome to the forum.
I see you joined in November, but this is your first post. Herzilch willkommen.
Welcome to the forum.
I see you joined in November, but this is your first post. Herzilch willkommen.
Ray ~~_/)~~
-
tewharaunz
- Chief Steward
- Posts: 50
- Joined: Fri Nov 18, 2011 9:55 pm
- Sailboat: MacGregor 26X
- Location: Charteris Bay, New Zealand
