There was some talk on this, but the posts are several years old and either the links are dead or images removed. There way at one time a link on the mod tracker ... but its dead too.

Anyone with information on the Poor Man's Traveler?

I need the same, but honestly have never really need the handle. A few wraps and a good pull are all that is needed tighten them up. Still, would be nice to have for ease of use. Blue Water Yachts does not carry them, They have a kit that will replace both winches with Marelon #6 winches, and handle...

Here are two of my V2-22 on Silver Lake in Enumclaw, Washington

Here are few images of mine ... It's from a 1979 V2-22. Should be close to the same http://ottodawg.is-a-geek.com/sailboat/rudder1.jpg http://ottodawg.is-a-geek.com/sailboat/rudder2.jpg http://ottodawg.is-a-geek.com/sailboat/rudder3.jpg Bunch of other images here for a V2-22: http://ottodawg.is-a-ge...

The Lewmar #6' =s ... are they the ones with the flat winch handle?

Sounds like its in the up position. There is one big pivot bolt. Try loosening it up.

And I wouldn't be using to in the up position, like the top two images. Easy way to break something with that much torque.

Prefect .... thanks

I have a B100L Honda outboard and it has an output for charging a battery. The plug came with the motor, you just need to supply the wire. Anyone do this before? Its a weird plug, so I assume that there is a polarity issue.

Hmmm ... the more I think about this the more I think its normal. If the winch is to low, that would pull the bow down, right? So if the boat was flat on the bunks and up against the bow chock, the winch should be puling straight or up ?? Edit: amazing what you can find when you use the right search...

I was pulling my Venture 2-22 out of the water yesterday and noticed something kind strange about the trailer bunks. When I pulled the boat up the stern end would come out of the water and settle on the bunks, but this would pull the bow away from the front chock. For the life of me I couldn't keep ...

Found a good one on CL ... so I'll make it fit :) http://ottodawg.is-a-geek.com/sailboat/batterySide.jpg http://ottodawg.is-a-geek.com/sailboat/batteryTop.jpg BCI GROUP SIZE 27 CENTENNIAL PART No. DC27MF CCA @ 0 degrees 700 RC minutes @ 25 amps 180 CA / MCA 875 HCA 1005 VOLTAGE 12 LENGTH 12 5/8 WIDT...

Here are few images of mine ...




Bunch of other stuff is here: http://ottodawg.is-a-geek.com/

Wow ... that looks clean. Looks like another line on the list: Remove headliner

BW Yachts has a battery strap for the V22, which matches the one I have behind the bulkhead the winch is mounted to. Any one know the size of the battery?

OK, whats with the EZ Cleats ... by Bill? I Can't find any information on them. Are they still available?