I finally got my new Lewmar folding wheel installed.Check it out (mods page)
Mike
FIGMENTGot that new Lewmar folding 32" wheel
Got that new Lewmar folding 32" wheel
I finally got my new Lewmar folding wheel installed.Check it out (mods page)
Mike
FIGMENT-
Jeff Drumm
- Chief Steward
- Posts: 63
- Joined: Sat Jan 31, 2004 5:39 am
- Location: 43 54' 03" N 69 59' 47" W 2002 26X "Wasabe"
Yes , ouch!
Yes , it cost a bundle.
Speaking of OUCH
I just got a call from the club, someone ran into my boat and put a hole in it.
Who said moorings were safer?
MMMike
Speaking of OUCH
I just got a call from the club, someone ran into my boat and put a hole in it.Who said moorings were safer?
MMMike
MMMike,
Sorry about the hole in your boat and just when you could enjoy that beautiful ships wheel !!
WHen you get a chance can you tell me what is mounted directly above the center shaft of the wheel on your pedestal ? Is it a folding bracket for your portable GPS or cell phone ?
I am trying to locate a good location for my Portable Magellan GPS 320 as the top of the pedestal is tied up with the Garmin Depth finder.
-DOn B
Sorry about the hole in your boat and just when you could enjoy that beautiful ships wheel !!
WHen you get a chance can you tell me what is mounted directly above the center shaft of the wheel on your pedestal ? Is it a folding bracket for your portable GPS or cell phone ?
I am trying to locate a good location for my Portable Magellan GPS 320 as the top of the pedestal is tied up with the Garmin Depth finder.
-DOn B
Bracketabove wheel
The thingy you see is a small speaker for UHF radio.
Bracket on top is for fish finder/ speed/ depth.
Auto pilot ...........next on my list.
The hole is really two holes. Fist size damage on the combing right under bimni bracket , then a smaller one six inches down and a small split in the
rub rail , plus a scratch.
Made by bow roller bracket of Gent on the next mooring over.
He says he will pay. Talked to Blue Water , they say a rub rail must be replace in one piece. Three or four guys a couple of hours on the hard. Thats a lot of man hours. Might take some bucks from him and fix it myself.
Any one pay to fix a hole fist size ??? how much??
MMMIke
Bracket on top is for fish finder/ speed/ depth.
Auto pilot ...........next on my list.
The hole is really two holes. Fist size damage on the combing right under bimni bracket , then a smaller one six inches down and a small split in the
rub rail , plus a scratch.
Made by bow roller bracket of Gent on the next mooring over.
He says he will pay. Talked to Blue Water , they say a rub rail must be replace in one piece. Three or four guys a couple of hours on the hard. Thats a lot of man hours. Might take some bucks from him and fix it myself.
Any one pay to fix a hole fist size ??? how much??
MMMIke