A forum for discussing topics relating to older MacGregor/Venture sailboats.
-
RodH
- Posts: 8
- Joined: Fri May 02, 2008 5:23 pm
- Location: Ottawa, Ont. Canada
Post
by RodH »
Hello again. Does anyone have the measurements for a spinaker for a Mac 26D.
Thanks Rod
-
RodH
- Posts: 8
- Joined: Fri May 02, 2008 5:23 pm
- Location: Ottawa, Ont. Canada
Post
by RodH »
Hi Guy,s. One too many glasses of wine. Just realized I spelled spinnaker wrong.
-
Kelly Hanson East
- Admiral
- Posts: 1786
- Joined: Sat Apr 19, 2008 2:35 pm
- Sailboat: MacGregor 26X
- Location: Kelly Hanson Marine........Mac 26M Dealer......Freedom Boat Works
Post
by Kelly Hanson East »
Ive hurd you can go back and eDIT your posts four spellENG corrections and No one will ever NO.
I cant confurm this since IVE never had 2 Due this, off course.
-
RodH
- Posts: 8
- Joined: Fri May 02, 2008 5:23 pm
- Location: Ottawa, Ont. Canada
Post
by RodH »
Tanks
-
Kelly Hanson East
- Admiral
- Posts: 1786
- Joined: Sat Apr 19, 2008 2:35 pm
- Sailboat: MacGregor 26X
- Location: Kelly Hanson Marine........Mac 26M Dealer......Freedom Boat Works
Post
by Kelly Hanson East »
Rod - Ive emailed our loft for this information btw...they are out on a mission so we might not hear back until mid week.
-
johnnyonspot
- First Officer
- Posts: 441
- Joined: Thu Oct 06, 2005 9:19 pm
- Location: Elk River, MN.
Post
by johnnyonspot »
Sailrite probably has it on their site.
-
Newell
- First Officer
- Posts: 439
- Joined: Sat Feb 07, 2004 1:42 pm
- Sailboat: MacGregor 26X
- Location: Layton, Utah, 96X Fast Sunday, 89D Windancer
Post
by Newell »
I thought both spellings were correct?
Herman Wadler's page has the measurements of all the Macs. I just compared the D genoa to the X genoa.
Newell
-
noahvale
- Deckhand
- Posts: 47
- Joined: Sat Jun 14, 2008 10:11 pm
- Sailboat: MacGregor 25
- Location: Baton Rouge, LA
Post
by noahvale »
How about info on a spinnaker for a Mac 25?
I know I want one, but don't have a clue as to what to get or where to get it.
