A forum for discussing topics relating to MacGregor Powersailor Sailboats
daver360
Deckhand
Posts: 38 Joined: Mon Aug 21, 2006 4:13 pm
Contact:
Post
by daver360 » Sun Jun 10, 2007 4:18 pm
Mikebe
Engineer
Posts: 142 Joined: Tue Feb 20, 2007 9:12 am
Location: Ashburn Va. 2007 26M "Rain Dancer" Honda 50HP
Post
by Mikebe » Mon Jun 11, 2007 5:36 am
Thanks for the pics. Worth a thousand words, as they say...
Andy26M
Captain
Posts: 553 Joined: Mon Jun 14, 2004 10:08 am
Location: Rochester, NY - 2004 26M
Post
by Andy26M » Mon Jun 11, 2007 10:25 am
Thanks for sharing!
What's the scoop on that fully-battened main?
- Andy
Duane Dunn, Allegro
Admiral
Posts: 2459 Joined: Fri Jan 02, 2004 6:41 pm
Sailboat: MacGregor 26X
Location: Bellevue, Wa '96 26x, Tohatsu 90 TLDI and Plug In Hybrid Electric drive
Contact:
Post
by Duane Dunn, Allegro » Mon Jun 11, 2007 11:00 am
Yes, where did you get the main, how much?
Scott
Admiral
Posts: 1654 Joined: Tue May 18, 2004 12:46 pm
Sailboat: Venture 25
Location: 1978 Catalina 22 with all the Racing Goodies!! 4 horse fire breathing monster on the transom
Post
by Scott » Mon Jun 11, 2007 4:21 pm
Moore pics of alicia!!, Dave not so much.
Just kidding Dave, Nice boat, looks just like mine.
NiceAft
Admiral
Posts: 6714 Joined: Tue Feb 01, 2005 7:28 pm
Sailboat: MacGregor 26M
Location: Upper Dublin,PA, USA: 2005M 50hp.Honda4strk.,1979 Phantom Sport Sailboat, 9'Achilles 6HP Merc 4strk
Post
by NiceAft » Mon Jun 11, 2007 6:16 pm
I always enjoy seeing a good a good sail
Thanks for the picts.
Ray
daver360
Deckhand
Posts: 38 Joined: Mon Aug 21, 2006 4:13 pm
Contact:
Post
by daver360 » Mon Jun 11, 2007 6:29 pm
Yes, the main is a 2X2 recommended by Delevi. I really like it. I bought it from
http://thesailwarehouse.com/ its the cm.24.75ph 750$. Unfortantely my genoa ripped the same weekend I installed the new main. It was dry rotted also. So I had to replace it also. That little spare factory jib just did not cut it! But no big deal been working alot of ot.
Thats funny scott! she does have nice accesories!!!
eric3a
Post
by eric3a » Mon Jun 11, 2007 6:37 pm
..